Quote:
Originally Posted by deneb2  Hi Malc
Can't offer any real advice presently except to make sure the batteries are connected OK in the transmitter. I guess you could use a scanner to listen if the 868MHz signal is present. As you heard from me previously, the quality control of the kit leaves a lot to be desired, so opening boxes and looking for dodgy joints would be a good idea before sending stuff back.
My unit has continued to operate OK, so I have no further quibbles presently.
good luck |
I noticed a tiny red LED light up for a few second when I installed the batteries on the transmitter and I believe I saw it blink a few times after that - I assume when it was sending a burst of data.